BRIDGE DECK TOP COAT
Bridge Deck Membrane Top Coat is a slow setting, 100% solids, two-component polymer product. Bridge Deck Membrane Top Coat is used as a waterproof membrane for protection against typical corrosion conditions that exist on many rail and DOT structures. Bridge Deck Membrane Top Coat is also used on applications requiring an aggregated topcoat. The slower setting membrane allows aggregate to be broadcast into the membrane before initial set. Bridge Deck Membrane Top Coat can be applied in temperatures down to -20˚F without effect on setup time or curing, and can be applied at specified thickness in one continuous application.
ADVANTAGES
Environmentally Friendly
Environmentally friendly formula, 100% solids, No VOCs
FAST CURE
Cures in seconds, even in temperatures well below freezing. Can accept asphalt overlays within one hour
CRACK BRIDGING CAPABLE
Has passed the ASTM C 1305 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane at 40 cycles.
TEMPORARY WEARING SURFACE
Can accept highway speed temporary vehicular traffic one hour after installation
SEAMLESS
Provides continuous seamless waterproofing membrane, even on irregular surfaces
MADE IN AMERICA
All Bridge Preservation™ products are manufactured in Kansas City, Kansas
PHYSICAL PROPERTIES
| Property | Test Method | Typical Value |
|---|---|---|
| Solids Content | 100% | |
| Gel Time | >90 Seconds | |
| Tack Free | >2 Minutes | |
| Open to Light Traffic | 1 Hour | |
| Elongation | ASTM D 638 | >250% |
| Tensile Strength (PSI) | ASTM D 638 | ~2,000 |
| Tear Strength (PLI; Die C) | ASTM D 624 | >390 |
| Crack Bridging Test (80 Mils BDM + 40 Mils Top Coat with Aggregate - 1/8” Opening @ 15°F, 40 cycles) | ASTM C 1305 | Pass |
| The value ranges stated above are based on system processing under laboratory conditions. Equipment configurations and/or field application conditions may produce variances in final system values. | ||