MULTI-USE PRIMER – FAST

Bridge Deck Multi-Use Primer – Fast is a specially formulated two-component polymer product that can also be thinned with solvent for better penetration or coverage, and can be used on both metal and masonry substrates. Bridge Deck Multi-Use Primer – Fast is a rapid setting 1:1 mix ratio that can be mixed and applied by roller or pumped through airless spray equipment.  Bridge Deck Multi-Use Primer – Fast may be used with all Bridge Preservation rapid curing sealants and spray coatings systems. It is designed for use in both interior and exterior concrete or metal coating applications.

ADVANTAGES

ULTRA LOW VISCOSITY

Ultra low viscosity will seal metal surfaces and penetrate concrete for permanent bond

FAST CURE

Cures in 1 to 4 hours depending on environmental conditions

COLD TEMPERATURE CURE

Will cure in Zero (0)°F temperatures. Cure time will be extended at lower temperatures

CONCRETE SEALER

Seals concrete surfaces helping to eliminate out-gassing of membrane topcoats

FLEXIBLE APPLICATION

Can be applied by plural component pump, or mixed by hand and applied by roller

MADE IN AMERICA

All Bridge Preservation™ products are manufactured in Kansas City, Kansas

PHYSICAL PROPERTIES

Property Test Method Typical Value
VOC 0% (Unless Thinned)
Solids Content 100% (Unless Thinned)
Working Time (Temperature Dependent) 15-20 Minutes
Tack Free Time (Temperature Dependent) ASTM D1640 30 Minutes - 1 Hour
Adhesion to Concrete Elcometer > 150 PSI
Adhesion to Steel Elcometer > 300 PSI
The value ranges stated above are based on system processing under laboratory conditions. Equipment configurations and/or field application conditions may produce variances in final system values.

PRODUCT DOCUMENTS